Exception information: Exception type: ConfigurationErrorsException Exception message: Unsecured Passwords Format Detected. The Membership Provider that contains the unsecure passwords format is: AspNetSqlMembershipProvider. The obsoleted password format is: Encrypted. For more information, see https://go.microsoft.com/fwlink/?linkid=834784.
Request information: Request URL: Request path: User host address: User: Is authenticated: False Authentication Type: Thread account name: IIS APPPOOL\DefaultAppPool
We tried to connect the website up to the wrong database. i.e. When we copied the database and moved it, we inadvertently copied the wrong database. This caused the above error due to the fact that the machinekey data in the web.config file was wrong for the database.
This caused the error 1310 to be thrown and the Application Pool associated with the new incorrectly setup site to stop.
Connect to the correct database!
Further to this we encountered a really weird set of errors after this. Initially the error appears to be a connection issue. But then we started getting failings that would come an go.
Error logs showing plenty of Event ID 1310 but also in the DNN logs:
DotNetNuke.Services.Log.EventLog.DBLoggingProvider – System.Data.SqlClient.SqlException (0x80131904): Could not allocate space for object ‘dbo.EventLog’.’PK_EventLogMaster’ in database ‘bla’ because the ‘PRIMARY’ filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at PetaPoco.Database.ExecuteScalar[T](String sql, Object args)
at DotNetNuke.Data.PetaPoco.PetaPocoHelper.ExecuteScalar[T](String connectionString, CommandType type, String sql, Object args)
at DotNetNuke.Data.SqlDataProvider.ExecuteScalar[T](String procedureName, Object commandParameters)
at DotNetNuke.Data.DataProvider.AddLog(String logGUID, String logTypeKey, Int32 logUserID, String logUserName, Int32 logPortalID, String logPortalName, DateTime logCreateDate, String logServerName, String logProperties, Int32 logConfigID, ExceptionInfo exception, Boolean notificationActive)
at DotNetNuke.Services.Log.EventLog.DBLoggingProvider.WriteLog(LogQueueItem logQueueItem)
The issue turned out to be that the database was a legacy database we received from another host. They had defined a database limit size in the SQL database it’s self. This caused the database to strop responding to DNN in a way we had never seen. After some time, the maintenance would drop the size of the database just below the limit and the DNN site would fire up. Until it reached the SQL database limit again.
Not likely to be a problem for many people, but something to check in the SQL dates settings.
Increase or remove the size of the SQL database limit.
Skip to end of metadata
Go to start of metadata
Whenever a new application pool is created, IIS creates a security identifier (SID) that represents the name of the application pool itself. For example, if you create an application pool with the name “Smartcrypt,” a security identifier with the name “Smartcrypt” is created in Windows. Resources can be secured by using this identity. However, the identity is not a real user account and will not show up as a user in the Windows User Management Console.
This can be configured by selecting a folder in Windows Explorer and adding the “Smartcrypt” identity to the folder’s Access Control List (ACL).
By doing this, the file or directory you selected will now also allow the Smartcrypt identity access.
You can do this via the command-line by using the ICACLS tool. The following example gives modify access to the Smartcrypt identity to the folder C:\web\mds and all contents.
ICACLS "C:\web\mds" /grant "IIS AppPool\Smartcrypt":M /t
When you attempt to open the forum module Control Panel, you receive a.net load error that says a critical error has occurred. Upon looking at the log files for the website within DNN, you’ll notice that the related error message looks something like this.
bsoluteURL:/Default.aspxDefaultDataProvider:DotNetNuke.Data.SqlDataProvider, DotNetNukeExceptionGUID:1012073d-d31d-4a73-a051-31478c9de05dAssemblyVersion:7.4.0PortalId:0UserId:3429TabId:107RawUrl:/Resources/Forum/ctl/EDIT/mid/506Referrer:http://website.com.au/Resources/ForumUserAgent:Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_3) AppleWebKit/600.6.3 (KHTML, like Gecko) Version/8.0.6 Safari/600.6.3ExceptionHash:eUa1nHF8hNveOCQzqX0zOg==Message:Object reference not set to an instance of an object.StackTrace:InnerMessage:Object reference not set to an instance of an object.InnerStackTrace: at DotNetNuke.Modules.ActiveForums.Controls.Callback.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)Source:FileName:FileLineNumber:0FileColumnNumber:0Method:Server Name: SERVERNAME
It is good practice to ensure that you have the latest version of the DotNetNuke forum module on your website. Especially if you are using the later versions of DNN. Currently the module project has been moved into an open source project on GitHub. The latest version can be found here: https://github.com/ActiveForums/ActiveForums
fixing the error
you need to ensure that the web.config file also includes the following reference.
<section name=”cryptography” requirePermission=”false” type=”DotNetNuke.Framework.Providers.ProviderConfigurationHandler, DotNetNuke” />
<add name=”CoreCryptographyProvider” type=”DotNetNuke.Services.Cryptography.CoreCryptographyProvider, DotNetNuke” providerPath=”~\Providers\CryptographyProviders\CoreCryptographyProvider\” />
Accessing your Google Analytic Data via API
To allow a third party module or application to view and display your Google Analytics data for your website. You need to get a few things organised.
Go to: http://www.google.com/analytics/ and follow their instructions to set up your URL under an account that you can manage and access with Admin permissions. We are not going to go through these steps here as it is a given that you will have this. Seek help from Google if you can’t manage.
Go to: https://developers.google.com/ and login with your account.
To get started using Google Analytics API, you need to first create or select a project in the Google Developers Console and enable the API. Using this link guides you through the process and activates the Google Analytics API automatically.
Alternatively, you can activate the Google Analytics API yourself in the Developers Console by doing the following:
In either case, you end up on the Credentials page and can create your project’s credentials from here.
From the Credentials page, click Create new Client ID under the OAuth heading to create your OAuth 2.0 credentials.
The newly created service account will have an email address, <projectId>-<uniqueId>@developer.gserviceaccount.com; Use this email address to add a user to the Google analytics account you want to access via the API. For this tutorial only Read & Analyzepermissions are needed.
Select User Management (in the Analytics Admin)
Enter the weird email address from the API credentials step above to give Read & Analyze permissions.
If you get all that right, then the module we use, will work to access your Google Analytics data from within your module.
FileHelpers, Version=188.8.131.52, Culture=neutral, PublicKeyToken=3e0c08d59cc3d657′
Error: File Management is currently unavailable. DotNetNuke.Services.Exceptions.ModuleLoadException: (0): error CS1705: Assembly ‘DotNetNuke.Modules.DigitalAssets, Version=184.108.40.2065, Culture=neutral, PublicKeyToken=null’ uses ‘Telerik.Web.UI, Version=2013.2.611.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4’ which has a higher version than referenced assembly ‘Telerik.Web.UI, Version=2013.1.403.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4’ —> System.Web.HttpCompileException: (0): error CS1705: Assembly ‘DotNetNuke.Modules.DigitalAssets, Version=220.127.116.115, Culture=neutral, PublicKeyToken=null’ uses ‘Telerik.Web.UI, Version=2013.2.611.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4’ which has a higher version than referenced assembly ‘Telerik.Web.UI, Version=2013.1.403.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4’ at System.Web.Compilation.AssemblyBuilder.Compile() at System.Web.Compilation.BuildProvidersCompiler.PerformBuild() at System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate) at System.Web.UI.TemplateControl.LoadControl(VirtualPath virtualPath) at DotNetNuke.UI.Modules.WebFormsModuleControlFactory.CreateModuleControl(TemplateControl containerControl, ModuleInfo moduleConfiguration) at DotNetNuke.UI.Modules.ModuleControlFactory.LoadModuleControl(TemplateControl containerControl, ModuleInfo moduleConfiguration) at DotNetNuke.UI.Modules.ModuleHost.LoadModuleControl() — End of inner exception stack trace —
The problem relates to a missing file that can be updated to the website /bin folder. The file is part of a free library that can be found here: http://sourceforge.net/projects/filehelpers/files/File%20Helpers%20Downloads/Version%202.0.0/
The file you need is: FileHelpers.dll front he 2.0 release from way back in 2010.
Download the file directly here: https://www.dropbox.com/s/otusnlf1jmy9f6o/FileHelpers.dll?dl=0
Extract it into the /bin folder.
And save that to the /BIN folder in your DNN website, this will fix the issue and leave any third party modules that reference it working.
In recent weeks, many of our DNN websites have systematically been targeted for Spam New User Registrations. There has been some discussion around the how and why, and as much as we can tell, the problem is this:
1. Some script kiddy has bothered to write a bot that finds DNN websites. It is not even a good bot, because it is not capable of validating registrations to automated active email addresses. (If you are the creator of the bot… “YOU ARE DOING IT WRONG” as it is not going to bring the Google results you are looking for.)
2. The bot will attempt access to: www.yoursite.com /?ctl=Register
3. This brings into play the default DNN registration process module.
4. This page is currently available if your site has either Public or Verified registrations enabled.
5. Tricks on derating the bot by raising the password complexity appeared to work a short time only.
6. Enabling the inbuilt Captcha is as good as useless, as almost any OCR application can break it.
7. A better simple solution is needed.
Here at InteractiveWebs, we decided that we would enable Recapcha (a cleaver Google Initiative https://www.google.com/recaptcha/ ) that is harder to be machine broken, and test the results. We found that all the spam registrations stopped once Recaptcha was used.
To do this we created two Free DNN Modules to add Recaptcha to the URL that this bot is using to register on sites. The two modules are to support DNN 6.2 + and 7x +.
The modules replace the standard captcha control to a recaptcha
This is a good link explaining how Recaptcha came into existence, and why it works well: https://www.youtube.com/watch?v=cQl6jUjFjp4
The free modules are available of download here: http://www.interactivewebs.com/DotNetNukeModules/ModuleDownloads.aspx
To install them and fix your site you will need to follow the instructions below:
Go to: https://www.google.com/recaptcha/intro/index.html and register your domain, or domains. This will give you the ability to use recaptcha on your DNN sites on any domain you like.
You are going to need they keys that this site provides:
Similar to these.
Install our “iwebs- register” module, making sure you pick the one that is for your DNN version.
Once installed, you need to add the module to a page as you would any other. We recommend adding it to it’s own page in the DNN Admin menu, and keeping the page Admin Only.
The module you are looking for is called: iWeb’s – Register – You can select the Settings from the module drop down as you would any other DNN module.
Enter the Public Key and Private Keu information that you received from your Google Recaptcha registration of your domain. THEN SELECT UPDATE to save the information.
After saving your public and private keys by clicking “update” you are ready to:
Click on the “Install Register Control”
This will inject the recaptcha setting into your website. So when you hit any registration URL (www.yoursite.com /?ctl=Register) you now get the recaptcah box.
Google has released what they call V2 of Recaptcha. We have update the module to support this. The process of updating to V2 goes like this.
1. By default, previously created recaptcha keys are V1. Any updated installs of our module will need to be put into V1 mode (in the settings) to keep working with your V1 keys that you have previously configured into the module. So after updating our module to the latest release, go into the module settings and enable V1 mode for the module to keep working.
2. V2 recaptcha is better than V1. So we would suggest that all users of the module update to V2. To do this, you update our module to the latest release, then go into the Google Recaptcha management page, and delete your domains security keys, then generate new keys for V2. They have instructions on that process, all be is hard to understand.
Once you have new V2 recaptcha keys, you update these new keys back into our module and ensure that the V1 mode is NOT enabled. The V2 recaptcha will then run on your site.
This was a quick solution to some script kiddies attempt to attack DNN. I’m actually struggling to find the purpose (if you wrote the bot and you are reading this, I would love to hear why). There is little threat by the registrations that I can find. More annoying that anything else. While Recaptcah can be broken, it would take some smarts or costs to use online services for the bot, so I suspect they will not bother and recaptcha will reign for this problem. In any case, if they spend some time and effort making the bot work for recaptcah, it is easy enough for us to implement some of the loads of other solutions available to stop them.
We included a donation button. If you find the solution, blog, research we did, modules we created and responses we provide to be helpful. Please consider throwing us a few $
Note: Our server is running Centos
The subprocess “/usr/local/cpanel/scripts/restartsrv_sshd” reported error number 3 when it ended.
1. Login to WHM and click on terminal
Type these 3 commands into there terminal window:
# chown root:root /var/empty/sshd
# chmod 711 /var/empty/sshd
# ls -ld /var/empty/sshd
2. Restart the ssh Daemon in WHM
Recently a new group of App store developers has banded together to help push the cause of making the Apple App Store a little more developer friendly for people trying to make a living as Developers of applications for Mac’s and iPhones.
The website is called The Developers Union and has some listed goals and targets. Their about page states
We believe that people who create great software should be able to make a living doing it. So we created The Developers Union to advocate for sustainability in the App Store.
Today, we are asking Apple to publicly commit — by the tenth anniversary of the App Store this July — to allowing free trials for all apps in the App Stores before July 2019. After that, we’ll start advocating for a more reasonable revenue cut and other community-driven, developer-friendly changes.
Here is why we joined.
1. The stated goal of offering free trials is something what has reared it’s head for the looming release of our next app. “NOTAM Reader”. The model we wish to operate under is not currently available where we can offer a free trial. So their first stated goal is something we are defiantly onboard with and hope they can influence Apple.
2. The possibility of reducing the 70/30% split that developers share with Apple is something we also support. Apple the entire ecosystem and for that we are always grateful of the opportunity to develop on such a popular and solid ecosystem. BUT. They are so hugely successful throughout the entire process that it is hard not to feel that the wealth distribution is a little out of kilter. This is not something we are militant about but certainly a review of this policy is something we feel is worthy of banding tougher.
In the future we will review the groups stated goals and only remain part of the group while the stated goals are not self destructive and the process remains respectful for everyone involved.
To clear the DNS cache on a Mac computer running the later version OSx
Open a Terminal window and paste in the following:
sudo dscacheutil -flushcache;sudo killall -HUP mDNSResponder; say cache flushed
Then hit enter.
You will be asked for the password you use to login as an admin.
– Updated the source for NOTAMS to fix the problem of FAA blocking regions via their website.– Updated New EK Categories.– Updated the colour coding for new categories.
This update addresses the latest released data from EK with new colour coding.
Also we were previously referencing NOTAM information from the FAA website. They have begun blocking IP addresses outside the USA. Subsequently we have referenced a new datasource and improved the formatting of the NOTAMS to be much easier to read.
While working with a Cpanel Website running WordPress, you attempt to upload a file and receive an error:
“The uploaded file exceeds the upload_max_filesize directive in php.ini”
Login to the WHM Administration system. Note that this is usually the HOST provider that has access to this.
Softare >> MultiPHP INI Editor
Then for the Different PHP Version in the Dropdown, selecting for example ea-php55 or ea-php56
Edit the post_max_size to something bigger that the default 8M
Edit the upload_max_filesize to something bigger than the default 2M
Loged in as the Account holder,
Software MultiPHP INI Editor
Select the location that you will apply this modification to. This should be the site or sub domain you are experiencing the problem with. (In our example we have the wordpress.projectcentre.com.au)
This applies to Cpanel April 2018 V68
alphassl the requested property value is empty Exception for HRESULT 0x80094004
When completing an Alphassl certificate install on IIS using the “Complete Certificate Request” you receive the error:
There was an error while performing this operation.Details: The requested property value is empty. (Exception from HRESULT: 0x80094004)
Now this is a Typical Microsoft Error in that it really only has meaning to the person who created the error. For us end users stuck in this weird Microsoft world, the error message is trying to tell us that the Certificate you pointed to for the “Complete Certificate Request function in IIS
is pointing to a .CER file that is not valid as a certificate for import.
So at this point it is time to check what certificate you placed in the .CER file that you are trying to import.
In particular with Alphassl certificates, the process of completing a new certificate request is completed by email. The end of the process involves receiving an email with instructions on how to complete the process of import.
Now if you are anything like me, and you think you know what you are doing having completed this process a few times. You tend to work fast and read instructions later (like an IKEA assembly job). And on several of my certificate install jobs I have made the same error. That being that I read to point 2 above. Click the link which if I read it is obviously to the Root Certificate Install. Then proceed to copy and paste the SHA-256 Certificate into the process and save is as a .cer file, then try to complete the process with that hash.
So basically this is all wrong. The certificate Hash is actually included in the bottom of the email received from Alphassl and that hash from the bottom fo the email is the correct hash to copy and paste to your IIS server and save as a .cer file. It is then this file that you use to complete the process with your IIS “Complete Certificate Request” function. Not the above Root certificate.
In August 2017 Microsoft released another version of Outlook for Office 365 for PC that caused a major problem for people connecting to Exchange 2016 servers. This problems is all to do with the AutoDiscovery setup that Outlook uses. Microsoft appear to have set outlook to use their Office 365 servers as an initial point of setup configuration regardless of how you have configured AutoDiscovery.
The bottom line is that outlook keeps trying to authenticate agains office365 and not your own server. While this is a known issue, as of January 2018 it has not been fixed in the next version of Outlook.
There are two fixes, and either one should work. We suggest Fix 1
First one involves setting a registry entry on the computer experiencing the issue. To fix this issue, create a text file and copy/paste this text below.
Windows Registry Editor Version 5.00
Then save it, and rename it as ExcludeExplicitO365Endpoint.reg and run it (this will import the applicable registry key). ONLY DO THIS if you are using an Exchange On-Premise account, and not a Office365 or hosted exchange account.
The solution I’ve found to work and the only one to stop this annoying popup of “enter your password”, is to downgrade to a lower version of office update.here is a script i wrote, in case you need to push this to several computers.
C:\Progr~1\Common Files\Microsoft Shared\officeClickToRun /update user updatetoversion=16.0.8326.2107 1>officec2rclient.exe
this will take your office 2016 to update 8326.2107 where this issue doesn’t happen.nothing will show up on the screen, but give it about 10 minutes and restart the computer. check the control panel/ add-remove programs and make sure office is on the new (or actually old…) version.
Here is a link to some helpful information in running this update: https://support.microsoft.com/en-us/help/2770432/how-to-revert-to-an-earlier-version-of-office-2013-or-office-2016-clic
Its kind of annoying to find that after a fresh install of Windows 2016 Server you have a service that fails to behave correctly.
When you click on the service, you will see something like this.
Even if you attempt to force a start, it does not resolve this issue.
The good news is that this service is really not something you want anyway if you have a windows server doing actual server functions.
The simple fix is to disable this service. The easy way to do this is to:
Open Windows Powershell
Type this command:
Get-Service -Name MapsBroker | Set-Service -StartupType Disabled -Confirm:$false
Get-Service -Name MapsBroker | Set-Service -StartupType Disabled -Confirm:$false
Problem is now fixed, and this annoying service is off and will not bother you again.